20 Channel Signal Retractable Cable Reel 1 Gigabit Ethernet Cat6 Cable For abb Robot Pendant Cable Reels Control System
|Place of Origin:||Guangdong,CN|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 Pc|
|Packaging Details:||Standard Export Paper carton or custom packing|
|Delivery Time:||8-15 days|
|Payment Terms:||T/T, Western Union,Paypal|
|Material:||Metal||Application:||Telecommunication, Robot Control System|
|Hose Length:||20m||Hose Included:||Yes|
|Signal:||20 Circuits||Gigabit:||1 Gigabit|
|MOQ:||1 Pc||Product Name:||Robot Pendant Cable Reels|
cable reel drum,
extension cord reel
JARCH 20-channel signal 1 Gigabit cable reel for robot control system
We can provide the solution in the robot reel,robot pendant cable reels the robot of ABB,Panasonic,KUKA,YASKAWA...
Item name:robot control system cable reel
Signal:20 signals,1 Gigabit
Application:Robot control system
Be sure reel base is securely grounded to mounting surface. Check for continuity following installation. On painted surfaces, remove paint at bolt location, use external tooth lockwashers or run ground wire from reel base to grounded object. Failure to ground will prevent reel from performing its intended function and could result in personal injury.
Mount reel to grounded, metal surface using four holes in mounting base. To minimize wear on cable and cable guide, reel should be
mounted in direct line with work so that cable is pulled out as straight as possible during use.
|Packaging Details:||Standard Export carton Package|
|Delivery Details:||Delivery time for Sample: 3 days / Delivery time for Order depends on quantity
Shipping:BY DHL, FedEx, UPS or TNT......
To increase spring tension:
Adding wraps of hose will increase spring tension. This can be accomplished by pulling out approximately 10 feet of hose, hand feed hose back up through roller bracket assembly* until loop is large enough to slip over sheave. Add two or three wraps until desired tension is achieved. Do not exceed spring capacity.
To reduce spring tension:
This can be accomplished by removing wraps of hose from the reel sheave. Remove wraps of hose from the sheave, one wrap at a time, until desired tension is obtained.
2.How do I install a new drive spring and set pre-turns?
We have several different types of spring driven reels. Each require a slightly different set of instructions. For "How-To" instructions on replacing a drive spring please have your reel model or drive spring number available and consult customer service for instructions.
3.Can my spring driven reel be made "constant tension"?
While most JARCH spring retractable reels can be made "constant tension" at the factory or by simply removing the latching system there are some models that may not have this capability.
Please contact jarch Customer Service to assure that the specific reel you have or require is capable of or available as a "constant tension" model.
4.Reel will not latch
This could mean it has a broken latch spring, bent latch pawl or latch plate. The broken part(s) will need to be replace.