Payment & Shipping Terms:
|Type:||Diesel Emissions Fluid Hose Reel||Application:||Industrial Equipment|
|Hose Length:||100 Ft./30m/15m||Drive Type:||Spring|
|Reel Grade:||Heavy Duty Reel||Max Temperature:||125°F|
|Clamp Rating:||100 AMP||Weight:||16lbs/7.5kg|
JARCH Hose Reels
JARCH hose reels are a widely recognised brand of industrial hose reels. They are suitable for a large range of applications.
Hard wearing and robust construction, these hose reels are suitable for fuels, lubricant and oils.
There are various options available including spring rewind JARCH and manual rewind JARCH.
*For larger hose capacities, please contact our sales team on email@example.com
Oil Tank Floating Disk Placing Static Electricity and Lightning Protection Coil hose reel
Lightning current distributor reel for floating roof of oil tank hose reel
It is used to prevent static electricity generated by lightning strike in floating roof tank of large crude oil storage tank.
Lightning current distributor is a low-frequency lightning current discharge device in floating roof oil tank. It connects the floating disc and tank wall through the distributor. No matter where the floating disc is located, the conductor of the middle-low frequency lightning current distributor is always in the minimum extended state, thus having the smallest inductance. Lightning current and bound charges can be effectively and timely restrained from the instantaneous overvoltage between the floating disc and tank wall to prevent the occurrence of sealing ring spacing. Flashover (arc), realizing low impedance connection between shunt and tank wall, ensuring that low frequency lightning current of floating disc is released in time, thus avoiding the phenomenon of spark between floating disc due to lightning passing.
***Strength - Made from industrial grade carbon steel.
***Compact design - Reels require little mounting space for applications where space is a critical requirement
***Corrosion resistance - Steel components are powder coated for superior corrosion resistance. Steel cable available with nylon coating for longer service life.
***Versatility - Guide arm adjusts to one of several payout positions requiring only standard tools.
Be sure reel base is securely grounded to mounting surface. Check for continuity following installation. On painted surfaces, remove paint at bolt location, use external tooth lockwashers or run ground wire from reel base to grounded object. Failure to ground will prevent reel from performing its intended function and could result in personal injury.
Mount reel to grounded, metal surface using four holes in mounting base. To minimize wear on cable and cable guide, reel should be
mounted in direct line with work so that cable is pulled out as straight as possible during use. See figures 1 & 2.
Jarch main products:
1. Fiber optic rotary joint series
2. Through bore slip ring series
3. Electro optical slip ring series
4. Hybrid slip ring series
5. Pneumatic rotary joint series
6. Hydraulic rotary union series
7. Capsule slip ring series
8. Pancake slip ring series
9. High current slip ring seriels
10.High speed slip ring series
11.Thermocouple slip ring series
12.Miniature slip ring series
13.Wind turbine slip ring series
14.Ethernet slip ring series
15.Explosion proof slip ring series
16.Mercury slip ring series
|Packaging Details:||Standard Export carton Package|
|Delivery Details:||Delivery time for Sample: 3 days / Delivery time for Order depends on quantity
Shipping:BY DHL, FedEx, UPS or TNT......
Adding wraps of hose will increase spring tension. This can be accomplished by pulling out approximately 10 feet of hose, hand feed hose back up through roller bracket assembly* until loop is large enough to slip over sheave. Add two or three wraps until desired tension is achieved. Do not exceed spring capacity.
This can be accomplished by removing wraps of hose from the reel sheave. Remove wraps of hose from the sheave, one wrap at a time, until desired tension is obtained.
*For Series D9000 reels, you will have to remove the bumper and control handle then feed end of hose through roller bracket assembly to add or remove wraps of hose from the reel drum.
2.How do I install a new drive spring and set pre-turns?
We have several different types of spring driven reels. Each require a slightly different set of instructions. For "How-To" instructions on replacing a drive spring please have your reel model or drive spring number available and consult customer service for instructions.
For how many wraps of "pre-tension" to put on the reel, please reference the chart below.
|Spring Number||Wraps Required|
3.Can my spring driven reel be made "constant tension"?
While most JARCH spring retractable reels can be made "constant tension" at the factory or by simply removing the latching system there are some models that may not have this capability.
Please contact Reelcraft Customer Service to assure that the specific reel you have or require is capable of or available as a "constant tension" model.
4.Reel will not latch
This could mean it has a broken latch spring, bent latch pawl or latch plate. The broken part(s) will need to be replace.
If you have any questions, pls contact us without any hesitation.
Contact Person: Kris